SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the solenoid dosing pumps according to the chemical you need to dose.
Analogue dosing pump Seko with a constant flow rate that can be manually adjusted or a proportional flow rate according to an external analogue (4÷20 mA) or digital pulse signal (e.g. from water meter). The control dial has percentage and "n" value in multiplication modes. The 6 position adjustable switch is in 3 division mode (1, 4, 10 = n) south Africa.
- 1 in multiplication mode (n=1)
- 1 for proportional 4÷20 mA signal
- 1 for constant functionality
The "pacing" function is adjustable by dip switch.
Features
- Flow rates: from 0.4 to 110 l/h
- Max back pressure: up to 20 bar
- Power supply 100÷240Vac 50/60 Hz
- Stroke rate: from 120 to 300 strokes/minute
- Pump head: PVDF
- Diaphragm: PTFE
- External Enclosure: PP reinforced with fiber glass protection degree IP65
- Manually priming valve